PSPixel · Web installer

Flash & install from your browser

Flash MicroPython and install the controller onto a Raspberry Pi Pico W straight from this page. No tools to install.

Console — live log of what the installer is doing, check here if a step stalls 

      


      

      
    
          
  1. 
            
    1. Flash MicroPython
    
            
    
              Hold the BOOTSEL button while plugging the Pico W
              into USB, then:
            
    
            
    
              
              
            
    
            
    
              Can't flash from the browser?
              
    
                Grab the firmware yourself from the
                
                  official MicroPython download page
                
                (pinned version for this install: …), then drag
                the .uf2 onto the RPI-RP2 drive that
                appears. The board reboots on its own.
              
    
              
    
                On Windows, USB flashing needs a WinUSB driver bound to the
                board's boot interface, which isn't installed by default — if
                Flash via USB picks the device but then does nothing,
                use the drag-and-drop method above instead (no driver needed).
              
    
            
    
            
            
          
    2.